TYRE INFLATOR

Main features:

174PSI/12bar/1200kPa Output pressure
Fit for almost any size automotive service facility
Auto-Start Inflation
Fully Automated, fully programmable, micro-processor controlled conversion system
Self-diagnostic features
Suitable for: Car, Light Truck, Bus

Technical Parameters:

Dimensions (Height*Width*Depth) 1260mm*360mm*360mm, 49.6″*14.2″814.2″

Net Weight 17.5kg/38.6lbs

Gross Weight 21kg/44.6lbs

Packing Size (Height*width*Depth) 200mm*1290mm*360mm, 7.9″*50.8″*15.7″

Power Requirement 100-240Vac 50/60HZ

Power Consumption 23VA

Operating Temperature Range -20℃/-4℉ to 70℃ /158℉

Max Inlet Air/ Nitrogen Supply 217PSI/ 15bar /1500kPa

Operating Range 5-174PSI/0.3-12bar/35-1200kPa

Accuracy ±1PSI/0.07bar / 7kPa

Resolution 1PSI/ 0.1bar /5kPa

Units of Measurement PSI/ bar / kPa

Specifications:

Auto-Start inflation
Automatic zero drift adjustment
Remain at last setting
Comprehensive diagnostics and error reporting
Audible and visual end of the cycle signal indicators
Large backlight LCD display
Vandal resistant mechanical switches
Suits Standard nitrogen bottle / Direct nitrogen supply from generator / Air compressor
Nos.*10M/32.8ft standard hose with single clip-on open type chuck

Operation Steps:

Set final target pressure using the + and – buttons.The LCD screen will show the target pressure.
Connect air hose to tire valve stem
Push the “FILL” button once
When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete
Immediately remove hose